ar7229p1001eq

Remove/install front door control unit

Typ ar · temat 72.29 · wersja 0100 · 2020-03-04

Dotyczy: Model 253, 293

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.29 Instalacja elektryczna drzwi — Seria 253 · Seria 293

EinPAS 25 Instalacja elektryczna/sieć wymiany danych/wielofunkcyjne › 25.15 Sieć wymiany danych/wielofunkcyjne › 25.15.11 Moduł sterujący/ moduł/ przekaźnik — Seria 253 · Seria 293

AR72.29-P-1001EQ

Remove/install front door control unit

18.02.2020

Model

253, 293

Remove/install front door control unit

P72.29-A082-79

Shown on driver door

1

Electrical connectors

N69/1

Driver door control unit

N69/2

Front passenger door control unit

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Remove door trim.

AR72.10-P-1000LW

2

Release and disconnect electrical connectors (1) of driver's door control unit (N69/1) and/or front-passenger door control unit (N69/2).

The number of electrical connectors (1) varies depending on the vehicle equipment.

3

Unclip and remove driver's door control unit (N69/1) and/or front-passenger door control unit (N69/2).

Installation: Ensure that catch hooks correctly insert into door module.

4

Install in the reverse order.

5

Perform commissioning of the driver's door control unit(N69/1) and front passenger door control unit(N69/2).

Only when replacing driver's door control unit (N69/1) and/or front-passenger door control unit (N69/2).

Model 293

AD00.00-P-2000-06FR

Model 253

AD00.00-P-2000-04B

Powiązane dokumenty