Remove, install operating unit on front door

AR72.29-D-6350TS

Remove, install operating unit on front door

20.12.2017

Model

907, 910

Shown on driver door

1

Door trim

4

Electrical connector

2

Operating unit

5

Screw

3

Door handle recess

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove the cover above the screw/bolt (5)

2

Unscrew screw/bolt (5)

3

Unclip the door handle recess (3) with the control panel (2) from the catch hooks (arrows) and remove it from the door trim (1) until the electrical connector (4) can be accessed


Carefully unclip the door handle recess (3) with the control panel (2).
Otherwise damage to the catch hooks will occur.

 Clip remover

*452589016300

4

Disconnect the electrical connector (4) and remove the door handle recess (3) with the control panel (2)

5

Unclip the control panel (2) from the door handle recess (3)

 Clip remover

*452589016300

6

Install in the reverse order



Check

7

Perform function test of control panel (2)