Shown on vehicle with code FR8 (Reversing camera) |
1 | Outer handle |
1.1 | Catch hook |
2 | Liftgate |
3 | Electrical connector |
4 | Electrical connector |
5 | Electrical connector |
6 | Nut |
S72.20-4612-06
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove paneling from liftgate (2) | ||
2 | Detach foil on liftgate (2) until outer door handle (1) is accessible | ||
3 | Release and disconnect electrical connection (3) | ||
4 | Release and disconnect electrical connection (4) | Model 447, 448.8 | |
5 | Release and disconnect electrical connector (5) | Model 447, 448.8 | |
6 | Unscrew left and right nut (6) | ||
7 | Press catch hook (1.1) on outer door handle (1) in direction of outer door handle (1) on both sides and detach outer door handle (1) on liftgate (2) | Installation: Ensure that outer door handle (1) is seated correctly. | |
8 | Guide outer handle (1) through opening in liftgate (2) and remove | ||
9 | Install in the reverse order | ||
Calibrate | |||
10 | Calibrate 360° rear camera with diagnostic system added | Model 447.8, 448.8 | |
|
Powiązane dokumenty
- ad0000s200004e
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar7220s4100e
- ar7220s6445e
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.