S72.20-4611-09
Shown on vehicle with code W68 (Electrically actuated liftgate) |
1 | Lock | 5 | Screw | |
2 | Damping material | 6 | Electrical connector | |
3 | Liftgate | M76/3 | Liftgate closing assist electric motor | |
4 | Cable |
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Remove/install | ||
1 | Remove paneling from liftgate (3) | ||
2 | Detach door foil on liftgate (3) until liftgate closing assist electric motor (M76/3) and door lock (1) are accessible | ||
3 | Guide liftgate closing assist electric motor (M76/3) out of liftgate (3) together with dampening (2) | Model 447, 448 | |
Installation: Ensure that dampening (2) is seated correctly on liftgate (3). | |||
4 | Remove dampening (2) and remove cable (4) from liftgate closing assist electric motor (M76/3) | Model 447, 448 | |
Installation: Ensure that dampening (2) is seated correctly on liftgate closing assist electric motor (M76/3). | |||
5 | Remove bolts (5) | Bolt, door lock to liftgate | |
6 | Guide door lock (1) out of liftgate (3) until electrical connector (6) is accessible | ||
7 | Disconnect electrical connector (6) and remove lock (1) | ||
8 | Install in the reverse order | ||
| Check | ||
9 | Check door lock (1) for proper function |
Powiązane dokumenty
- ar7220s6445e
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.