1 | Gas-filled strut |
2 | Bracket with ball stud |
3 | Bracket with ball stud |
4 | Fuse |
5 | Screwdriver |
S72.20-4620-06
Danger ! | Risk of injury from fingers being pinched or jammed when working on gas struts under pressure | Only remove and install pneumatic springs when they are not under tension and when the components are properly secured. | |
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Remove/install | ||
1 | Open liftgate and secure against lowering | ||
2 | Lift upper retainer (4) with suitable screwdriver (5) as shown and remove left and right gas-filled strut (1) from bracket with ball stud (3) | | |
Installation: Clip left and right gas-filled strut (1) with upper retainer (4) installed into ball head on bracket with ball stud (3). | |||
3 | Lift lower retainer (4) with suitable screwdriver (5) as shown and remove left and right gas-filled strut (1) from bracket with ball stud (2) | | |
Installation: Clip left and right gas-filled strut (1) with lower retainer (4) installed into ball head on bracket with ball stud (2). | |||
4 | Install in the reverse order |
Powiązane dokumenty
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.
- as0000z001201a Niebezpieczeństwo obrażeń na skutek zakleszczenia lub zmiażdżenia podczas czynności przy wstępnie naprężonych sprężynach gazowych.