ar7220s2122e

Remove/install sealing frame of rear-end door

Typ ar · temat 72.20 · wersja 0100 · 2014-05-16

Dotyczy: MODEL 447 with CODE W50 (Rear-end door, double-wing, 180 degrees without window) MODEL 447 with CODE W54 (Hinged rear doors, opening to side wall)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.20 Drzwi na ścianie tylnej, drzwi tylne — Seria 447

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.43 Drzwi tylne — Seria 447

AR72.20-S-2122E

Remove/install sealing frame of rear-end door

06.05.2014

MODEL

447

with CODE W50 (Rear-end door, double-wing, 180 degrees without window)

MODEL

447

with CODE W54 (Hinged rear doors, opening to side wall)

Remove/install sealing frame of rear-end door

1

Frame seal

S72.20-4652-12

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1

Open both rear-end doors

2

Remove frame seal (1)

Installation: Align joint edge on sealing frame (1) downward in center.

3

Install in the reverse order

Powiązane dokumenty