ar7220s2120e

Remove/install door frame seal of liftgate

Typ ar · temat 72.20 · wersja 0101 · 2015-12-09

Dotyczy: Model 447, 448 with code W65 (Tailgate) Model 447, 448 with code W68 (Electrically operated liftgate)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.20 Drzwi na ścianie tylnej, drzwi tylne — Seria 447 · Seria 448

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.36 Pokrywa/ klapa › 35.36.33 Klapa tylna/ klapa bagażnika — Seria 447 · Seria 448

AR72.20-S-2120E

Remove/install door frame seal of liftgate

25.11.2015

Model

447, 448

with code W65 (Tailgate)

Model

447, 448

with code W68 (Electrically operated liftgate)

Remove/install door frame seal of liftgate

Shown on vehicle with CODE W68 (Electrically actuated liftgate)

1

Frame seal

2

Actuation

3

Liftgate

S72.20-4644-11

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1

Open liftgate (3)

2

Remove actuator (2) from liftgate (3)

Model 447, 448
with code W68 (Electrically operated liftgate)

Removal:
Carefully lift retaining bracket on retainer for actuator (2) until retainer can be detached.
Danger of breaking retainer.

3

Remove frame seal (1)

Installation: Align joint edge on sealing frame (1) downward in center.

4

Install in the reverse order

Powiązane dokumenty