ar7220p6615ph

Remove/install rear-end door trim

Typ ar · temat 72.20 · wersja 0102 · 2019-04-09

Dotyczy: Model 463.241 up to model year 2013 with code 979 (Special protection MB Guard) with code ZS4 (Special protection version FB4)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.20 Drzwi na ścianie tylnej, drzwi tylne — Seria 463 (modele 241)

EinPAS 37 Wyposażenie wnętrza › 37.45 Okładzina › 37.45.31 Okładzina drzwi — Seria 463 (modele 241)

AR72.20-P-6615PH

Remove/install rear-end door trim

22.03.2019

Model	463.241
	up to model year 2013
	with code 979 (Special protection MB Guard)
	with code ZS4 (Special protection version FB4)

Remove/install rear-end door trim

1	Upper door trim
2	Velcro fastener
3	Cover
4	Door closing handle
5	Lower door trim
6	Adhesive
7	Ferrules

P72.20-2100-06

	Remove
1	Pry off upper section of door trim (1) using an assembly wedge	 Carefully release trim from velcro fastener.
		 Mounting wedge	*110589035900
2	Remove upper part of door trim (1)
3	Detach cover (3)	 Removal: Slide back cover (3) while pressing door trim slightly toward outside of door.
4	Unscrew door closing handle (4)
5	Remove lower part of door trim (5) on inner door panel using a door trim release lever.
	Install
6	Attach lower part of door trim (5).	 Installation: Check retaining clips of door trim (5), replace if necessary.
7	Attach door closing handle (4)
8	Attach cover (3).	 Installation: When installing the cover, press door trim slightly toward outside of door.
9	Clean bonding surfaces on door frame with silicone remover and grind off inside of door trim.	 Perform only after installing a new rear window or door trim.
		Silicone remover Order No. 3295	*BR00.45-Z-1052-04A
10	Join velcro fastener (2) and attach to window pane frame.	 Perform only after installing a new rear window or door trim.
11	Apply adhesive (6) to velcro fastener (2).	 Perform only after installing a new rear window or door trim.
		Quick Seal Black, art. no. 34503	*BR00.45-Z-1042-02A
12	Attach upper section of door trim (1) and fasten with ferrules (7).	 Perform only after installing a new rear window or door trim.

Remove/install rear-end door trim

110 589 03 59 00

Mounting wedge

Repair materials

Number	Designation	Order number
BR00.45-Z-1042-02A	Quick Seal Black, art. no. 34503	KENT Deutschland GmbH www.kenteurope.com
BR00.45-Z-1052-04A	Silicone remover Order No. 3295	Prosol Lacke + Farben GmbH Schneidmühlweg 12 63741 Aschaffenburg Germany Tel. +49 6021 3480-0 Fax +49 6021 3480-40 http://www.prosol-farben.de