ar7220p2832rg

Remove/install gas-operated strut from tailgate

Typ ar · temat 72.20 · wersja 0100 · 2014-11-29

Dotyczy: MODEL 190

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.20 Drzwi na ścianie tylnej, drzwi tylne — Seria 190

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.36 Pokrywa/ klapa › 35.36.33 Klapa tylna/ klapa bagażnika — Seria 190

AR72.20-P-2832RG

Remove/install gas-operated strut from tailgate

20.11.2014

MODEL

190

Remove/install gas-operated strut from tailgate

1

Gas-filled strut on liftgate

2

Retainer

3

Screwdriver

P72.20-3396-03

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Danger !

Risk of injury from fingers being pinched or jammed when working on gas struts under pressure

Only remove and install pneumatic springs when they are not under tension and when the components are properly secured.

AS00.00-Z-0012-01A

Remove/install

1

Open liftgate and secure against lowering

2

Loosen retainers (2) on brackets on left or right gas-filled strut (1) with suitable screwdriver (3) and remove left and right gas-filled strut (1)

Installation: Clip left or right gas-filled strut (1) into ball head on bracket with retainer (2) installed.

3

Dispose of removed gas-operated strut (1) properly

Only when replacing gas-filled strut (1).

4

Install in the reverse order

Powiązane dokumenty