P72.20-2246-07
1 Inner cover
2 Plastic hinge
4 Rear-end door
3 Hinge pivot
| Remove | ||
1 | Remove rear-end door bottom section (4). | ||
2 | Open inner cover (1) | ||
3 | Break open plastic hinge (2) on inner cover (1) on left and right with suitable tool (arrows). | Inner cover (1) damaged during removal | |
Do not scratch adjacent plastic parts on rear-end door (4). | |||
4 | Slightly close inner cover (1), pull out of hinge pivot toward rear (3) and remove. | ||
5 | Remove hinge pivot (3) from rear-end door (4) with suitable tool. | ||
| Install | ||
6 | Position inner cover (1) on rear-end door (4) and allow locks to arrest. | Do not scratch paneling on rear-end door (4). | |
7 | Insert hinge pivot (3) on left and right with straight knurled side toward outside and carefully knock in against stop with suitable tool. | ||
8 | Install rear-end door bottom section (4). |