ar7220d401401ts

Adjust release on rear-end door at left

Typ ar · temat 72.20 · wersja 0101 · 2019-03-13

Dotyczy: Model 907.6/7, 910.6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.20 Drzwi na ścianie tylnej, drzwi tylne — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 29 System uprawniający do jazdy/zabezpieczający › 29.16 Blokowanie/ odblokowanie › 29.16.32 Zamek/ klamka — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR72.20-D-4014-01TS

Adjust release on rear-end door at left

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Model

907.6/7, 910.6

Adjust

Adjust release on rear-end door at left

D72.20-1269-09

To ensure that the upper rotary tumbler (1) and the lower rotary tumbler (2) open simultaneously, they must be synchronized via the setting screw (5) on the release.

1

Open left rear-end door

2

Use a suitable tool to lock the upper rotary tumbler (1) and lower rotary tumbler (2).

3

Release screws/bolts (3) by one revolution.

4

Slowly operate release lever (4) until the upper rotary tumbler (1) opens and hold release lever (4) in this position.

5

Slowly twist setting screw (5) clockwise until the lower rotary tumbler (2) opens.

6

Tighten bolts (3).

7

Close rear-end doors.

Powiązane dokumenty