ar7220d2122ts

Remove/install sealing frame of rear-end door

Typ ar · temat 72.20 · wersja 0100 · 2019-01-23

Dotyczy: Model 907.6/7, 910.6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.20 Drzwi na ścianie tylnej, drzwi tylne — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.43 Drzwi tylne — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR72.20-D-2122TS

Remove/install sealing frame of rear-end door

20.12.2018

Model

907.6/7, 910.6

Remove/install sealing frame of rear-end door

D72.20-A001-79

Shown on model 907.6 with code W73 (Rear-end door step)

1

Frame seal

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1

Open both rear-end doors.

2

Remove sealing frame (1).

Installation: Ensure that abutting edge of sealing frame (1) is centered at bottom.

3

Install in the reverse order

Powiązane dokumenty