Adjust sliding door · ar7216s1023a · Mercedes-Benz WIS

AR72.16-S-1023A

Adjust sliding door

8.6.95

MODEL 638

S72.16-1007-09

1 Front guide wedge on sliding door

2 Sliding element on B-pillar

3 Striker eye

4 Bottom carriage

5 Middle carriage

6 Upper carriage

K Gaps between sliding door and upper C-pillar

L Gaps between sliding door and lower C-pillar

M Gap between sliding door and roof

N Gaps between sliding door and rocker panel

	Check
1	Checks gaps on sliding door		AR60.00-S-0700-01V
	Adjust
2	Adjust gaps from sliding door to roof (M) and from sliding door to roof by vertically adjusting striker eye (3)	 To adjust the sliding door, it is necessary to adjust the position of the guide wedge at front of the sliding door (1) in relation to the slider on the B-pillar (2).It must be possible to adjust the guide wedge on the front of the sliding door over the entire adjustment procedure	*BE60.00-N-1003-01A
			*BA72.16-N-1004-01B
		 Torque wrench	*001589722100
3	Adjust gaps from sliding door to roof (M) and from sliding door to roof by vertically adjusting the sliding door on the bottom carriage 4)		*BE60.00-N-1003-01A
			*BA72.16-N-1003-01B
		 Torque wrench	*001589722100
4	Adjust gaps between sliding door and upper C-pillar (K) and gaps between sliding door and lower C-pillar (L) by horizontally adjusting center carriage (5).		*BE60.00-N-1003-01A
			*BA72.16-N-1002-01B
		 Torque wrench	*001589722100
5	Adjust gaps between sliding door and rocker panel (N) by horizontally adjusting upper carriage (6) and lower carriage (4).		*BE60.00-N-1003-01A
			*BA72.16-N-1001-01B
			*BA72.16-N-1003-01B
		 Torque wrench	*001589722100
6	Adjust sliding door in relation to upper and lower C-pillar by horizontally adjusting striker eye (3).	 Sliding door must be adjusted flush up to 1 mm extension.
			*BA72.16-N-1004-01B
		 Torque wrench	*001589722100
7	Adjust position of slider in relation to B-pillar (2) by adjusting guide wedge at front of sliding door (1)
	Check
8	Close sliding door and check in relation to B-pillar, adjust if necessary	 Sliding door must be adjusted flush up to 1 mm extension.
9	Check whether sliding door opens, closes correctly and check for proper function

Test and adjusting values, gap dimensions at hoods, doors and covers

Number	Designation				Model 638


BE60.00-N-1003-01A	Size of gap	Sliding door to upper C-pillar	Dim. "K"	mm	7,01
		Sliding door to lower C-pillar	Dim. "L"	mm	7,01
		Sliding door to roof	Dim. "M"	mm	8,01
		Sliding door to rocker panel	Dim. "N"	mm	6,01
			Fig., see	mm	AR60.00-S-0700-01V

 Sliding doors

Number	Designation		Model 638


BA72.16-N-1001-01B	Bolt, upper carriage to sliding door	Nm	19
BA72.16-N-1002-01B	Bolt, center carriage to sliding door	Nm	37
BA72.16-N-1003-01B	Bolt, bottom carriage to sliding door	Nm	19
BA72.16-N-1004-01B	Bolt, striker eye to B-pillar	Nm	23

Torque wrench

001 589 72 21 00

Powiązane dokumenty

ar6000s070001v