AR72.16-D-4036NA | Remove/install inside door lock on sliding door | 4.9.01 |
MODEL WD1, WD2, WD3, WD6, WD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
MODEL 903.66 /67, 904.66 with CODE (ZU7) National version for Canada
MODEL 903.66 /67, 904.66 with CODE (ZU8) National version for USA
MODEL 903.66 /67, 904.66 with CODE (ZU9) National version for Mexico
D72.16-1150-09
1 Inside door lock
2 Motor (central locking)
3 Release cable
4 Door paneling
5 Inner actuation
11 Connector
12 Connector
13 Locking rod
14 Grommet
15 Button
6 Bolt
7 Stop buffer
8 Torx bolt
9 Torx bolt
10 Connector
| Remove/Install | ||
1 | Unscrew bolts (6) unclip inner actuation (5) and remove | | |
2 | Remove stop buffer (7) | | |
3 | Remove door paneling (4) from sliding door. | ||
4 | Unscrew button (15 from locking rod (13) | ||
5.1 | Separate connectors (10, 11, 12) | With code FY6, central locking with radio remote control | |
Installation: Observe routing of electric leads. | |||
6 | Unscrew torx bolts (9) for inside door lock (1) | Replace self-locking torx bolts (9) | |
| |||
| |||
7 | Remove inside door lock (1) from sliding door. | Installation: Ensure that door handle lever (arrow) is positioned in front of inner door lock lever (1) | |
8 | Detach unlocking cable (3) from inside door lock (1) | Unhook inner door panel from clip to facilitate installation Ω | |
9 | Install in the reverse order |
Sliding doors
Number | Designation | Models | Models | ||
BA72.16-N-1002-01A | Bolt, inner actuation to sliding door | Nm | 10 | 10 | |
BA72.16-N-1007-01A | Bolt, inner door lock to sliding door | Nm | 10 | 10 | |
Torx bit set
000 589 01 10 00