D72.16-1149-09
1 | Door lock | 4 | Door trim | 7 | Sliding door stop | ||
2 | Release cable | 5 | Inside door opener | 8 | Screw | ||
3 | Bolts | 6 | Screw | 9 | Electrical connector |
| Remove/install | ||
1 | Unscrew bolt (6) and remove inside door opener (5) | Bolt, inside door handle to sliding door | |
2 | Unscrew bolt (8) and remove sliding door stop (7) | Installation: Replace bolt (8) | |
Bolt, sliding door stop on sliding door | |||
3 | Remove door paneling (4) on sliding door | Remove door paneling (4) from sliding door in area of expansion rivet. | |
4 | Disconnect connector (9) for rotary tumbler switch | Installation: Pay attention to routing of electric cable. | |
5 | Remove screws/bolts (3) | Installation: Replace bolts (3). | |
Bolt, outer door lock to sliding door | |||
6 | Remove door lock (1) from sliding door. | ||
7 | Detach unlocking cable (2) at door lock (1). | ||
8 | Install in the reverse order |