140 589 02 33 00
Extraction hook
1 | Remove cover (2) from sliding carriage in center (1). |
D72.16-1324-01
2 | Thread the toothed belt (3), starting at guide pulley (4), into sliding carriage in center (1) and route up to gear (5). |
D72.16-1325-01
3 | Place the toothed belt (3) against the resistance of the angle gear in the direction of the arrow around the gear (5). |
D72.16-1326-01
4 | Leave the toothed belt (3) to rest behind the guide pulley (6) on guide rail (7). |
5 | Remove the toothed belt (3) out of the sliding carriage in center (1) using the extraction hook (8). |
D72.16-1327-01
6 | Install cover (2). |
The cover (2) must audibly engage on the sliding carriage in center (1). |
D72.16-1324-01