ar7215s1051a

Removing and installing hinged door

Typ ar · temat 72.15 · wersja 0101 · 1999-02-05

Dotyczy: MODEL 638.0 with CODE (W50) Two-wing rear door 180° with CODE (W51) Two-wing rear door 180° with window MODEL 638.1 with CODE (W51) Two-wing rear door 180° with window'

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.15 Drzwi obrotowe — Seria 638 (modele 0**, 1**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.40 Drzwi przednie — Seria 638 (modele 0**, 1**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.41 Drzwi środkowe — Seria 638 (modele 0**, 1**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.43 Drzwi tylne — Seria 638 (modele 0**, 1**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.46 Drzwi tylne — Seria 638 (modele 0**, 1**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.51 Drzwi pasażerskie 1 › 35.51.32 Skrzydło drzwi/rama drzwi — Seria 638 (modele 0**, 1**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.52 Drzwi pasażerskie 2 › 35.52.32 Skrzydło drzwi/rama drzwi — Seria 638 (modele 0**, 1**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.53 Drzwi pasażerskie 3 › 35.53.32 Skrzydło drzwi/rama drzwi — Seria 638 (modele 0**, 1**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.54 Drzwi pasażerskie 4 › 35.54.32 Skrzydło drzwi/rama drzwi — Seria 638 (modele 0**, 1**)

AR72.15-S-1051A

Removing and installing hinged door

26.10.98

MODEL 638.0
with CODE (W50) Two-wing rear door 180°
with CODE (W51) Two-wing rear door 180° with window

MODEL 638.1 with CODE (W51) Two-wing rear door 180° with window

Removing and installing hinged door

S72.20-2504-11

1 Connectors

2 Rubber hose

3 Screws, bottom hinge

4 Hinge

5 Door wing

6 Screws, top hinge

Removal, installation

1

Switch off ignition

2

Open door wing

3

Remove side interior paneling in rear

AR68.30-S-1180A

4

Disconnect connectors (1)

Remove ground lead installed in side wall. Only disconnect connectors routed from the rubber hose to the door wing.

5

Pull rubber hose (2) with wiring harness out of body opening

6

Unscrew screws (3)

One hinge remains on the door (4) which should be removed when replacing the door.

Hold door wing (5) and support. Avoid damaging paint.

*BA72.15-N-1003-01B

7

Unscrew screws (6)

The door wing is sealed with a rubber seal on the hinge side. Ensure that seal is seated correctly when installing.

*BA72.15-N-1002-01B

8

Remove door wing (5)

9

Install in reverse order

Adjustment

10

Adjust rear door

Check gaps on door all the way around.

AR72.20-S-1032A

Hinged doors

Number

Designation

Model 638.0/1

BA72.15-N-1002-01B

Screw for top hinge on door wing

Nm

27

BA72.15-N-1003-01B

Screw for bottom hinge on door

Nm

30

Powiązane dokumenty