P72.12-2772-09
1 Door lining
2 Long wedge
3 Power window cover
8 Door lock cover
9 SRS badge
10 Bolts
14 Cover
4 Door handle recess cover
5 Bolts
6 Trim panel
7 Screw
P72.12-2524-06
1 Door lining
10 Screw
11 Mounting clips
12 Bowden cable
13 Electrical connector
H4/3h2 Woofer
H4/4h2 Woofer
N69/3 Door control module rear left
N69/4 Door control module rear right
| Remove/install | ||
1 | Completely open crank window in left or right rear door | See Operator's Manual | |
2.1 | Remove ashtray from rear door | Vehicle with code 301 Ashtray package/smoker package | |
2.2 | Install assembly wedge from front behind cover (14), unclip cover (14) and remove | Vehicle without code 301 Ashtray package/smoker package | |
| |||
3 | Install long wedge (2) from top behind power window cover (3), unclip power window cover (3) and remove | | |
4 | Unclip door handle recess cover (4) in lower area of door lining (1) and remove downward | ||
5 | Remove bolts (5) and take off trim panel (6) | Ensure that trim panel (6) is seated correctly on door lining (1). | |
6 | Remove screw (7) and take off door lock cover (8) | ||
7 | Unclip SRS badge (9) using suitable screwdriver | ||
8 | Remove bolts (10) | ||
9 | Press door lining (1) off of inner door panel using assembly wedge on mounting clips (11) | Move mounting wedge directly to mounting clips (11) and ensure that the retaining tabs on the mounting clips (11) do not tear out of the door lining (1). | |
| |||
Installation: Replace damaged mounting clips (11). | |||
10 | Tilt door lining (1) inward at top until Bowden cable (12) is accessible | ||
11 | Unhook Bowden cable (12) from inner door opener | ||
12 | Disconnect electrical connectors (13) from left rear door control unit (N69/3) or right rear door control unit (N69/4) | ||
13 | Disconnect electrical connector from woofer (H4/3h2) or woofer (H4/4h2) | ||
14 | Remove door lining (1) | ||
15 | Install in the reverse order |
115 589 03 59 00
Long wedge
Mounting wedge
110 589 03 59 00