D72.12-A013-79
Shown on left rear door (4) |
1 | Bearing bracket | 4 | Rear door | |
1.1 | Lever | 5 | Cable | |
2 | Screw | 6 | Door foil | |
3 | Seal |
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Remove outside door handle of the corresponding rear door (4). | ||
2 | Remove door trim of the rear door (4). | ||
3 | Remove screw/bolt (2). | Bolt, bearing bracket to rear door | |
4 | Remove seal (3). | ||
5 | Release door foil (6) in the top area. | ||
6 | Remove bearing bracket (1) until the cable (5) is accessible. | ||
7 | Unclip cable (5) from the bearing bracket (1) (arrow A). | ||
8 | Unhook cable (5) from lever (1.1) and remove bearing bracket (1). | ||
9 | Install in the reverse order | ||
| Check | ||
10 | Check opening and closing function of the rear door (4). |
Powiązane dokumenty
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar7212d1011tsr
- ar7212d2410tsr
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.