Remove/install outside door handle on front door

AR72.10-S-2400E

Remove/install outside door handle on front door

14.12.2015

Model

447

Model

448

Shown on driver side on MODEL 447.8 with CODE FZ8 (Comfort opening and closing with IR remote control)

1

Grommet

3

Door lock cylinder

5

Door handle

2

Adjustment screw

4

Electrical connector

6

Seal

 

Remove/install

1

Remove grommet (1)

2

Pull out door handle (5) in direction of arrow (arrow A) and detach adjustment screw (2)

 Loosen adjustment screw (2) until a perceptible resistance on the tool can be felt.

 Installation: Tighten adjustment screw (2) until a perceptible resistance on the tool can be felt.

3

Remove door lock cylinder (3) from front door

4

Disconnect electrical connection (4)

Model 447
with code FZ8 (Convenience opening and closing w. IR remote ctrl.)
Model 448
with code FZ8 (Convenience opening and closing w. IR remote ctrl.)
When removing door handle (5) on driver side.

5

Pull door handle (5) toward rear out of outer door handle bracket in direction of arrow (arrow B) and remove in direction of arrow (arrow C)

6

Remove seal (6)

7

Install in the reverse order



Check

8

Check comfort opening and comfort closing feature for proper function

Model 447
with code FZ8 (Convenience opening and closing w. IR remote ctrl.)
Model 448
with code FZ8 (Convenience opening and closing w. IR remote ctrl.)

9

Close rotary tumbler on door lock on driver side and check door lock cylinder (3) for proper function using emergency key