ar7210s1910c

Remove/install front door window

Typ ar · temat 72.10 · wersja 0100 · 2012-09-07

Dotyczy: MODEL 415

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.10 Drzwi przednie — Seria 415

EinPAS 36 Widoczność › 36.15 Szyba szklana/ okno › 36.15.41 Okno boczne — Seria 415

AR72.10-S-1910C

Remove/install front door window

30.8.12

MODEL

415

Remove/install front door window

Shown on left front door with CODE FE6 (front power window on driver side with comfort control)

1

Screw

2

Electrical connector

S72.10-4572-11

Remove/install

Danger !

Risk of injury from contusions to hands if window glass is not secured

Secure window to prevent it from falling down.

AS67.00-Z-0002-01A

1

Remove door foil

AR72.10-S-1010C

2

Remove outer sealing rail

AR72.10-S-1700C

3

Remove inner sealing rail

AR72.10-S-1600C

4.1

Move window to removal position

MODEL 415
without CODE FE6 (Front electric power window, driver side with convenience feature)
without CODE FE8 (Front electric power window)

For this purpose install window crank and move window down until both bolts (1) are accessible.

4.2

Move power window to removal position

MODEL 415
with CODE FE8 (Front electric power window)
MODEL 415
with CODE FE6 (Front electric power window, driver side with convenience feature)

For this purpose install electrical connector (2) in front power window switch. Front power window switch remains in removed door trim. Move window down until both bolts (1) are accessible. Then disconnect electrical connector (2) again.

5

Remove window

For this purpose unscrew bolts (1), loosen window and remove.

6

Install in the reverse order

Check

7

Perform function test

Powiązane dokumenty