P72.10-2793-07
Shown on model 230.4 without code (P99) Special model "AMG Black Series"
1 Bolts
2 Door lock cover
3 Gasket
7 Door handle
8 Gasket
4 Access opening
5 Screw
6 Lock guide cylinder
| Remove/install | ||
1 | Unscrew bolts (1) and remove door lock covering (2). | ||
2 | Pull seal for outer sealing rail (3) out of access opening (4) | ||
3 | Unscrew bolt (5) | Secure bolt (5) against falling down. | |
4 | Pivot lock cylinder guide (6) toward rear and pull out. | Pull door handle (7) until lock cylinder guide (6) is free to move. | |
Installation: Ensure that seal (8) is seated correctly in lock cylinder guide (6) | |||
5 | Disconnect electrical connector for infrared receiver | ||
6 | Install in the reverse order |