Remove/install front door hinge · ar7210p2660lc · Mercedes-Benz WIS

AR72.10-P-2660LC

Remove/install front door hinge

02.07.2014

MODEL	217
	Passenger side

P72.10-4216-09

Shown on right front door on MODEL 222

1	Bottom hinge	3	Door sill	9	Cap
1.1	Bottom A-pillar hinge leaf	4	Edge guard	10	Nuts
1.2	Bottom door hinge leaf	5	Side floor covering	11	Screw
2	Top hinge	6	Footrest floor covering	12	Cover
2.1	Top A-pillar hinge leaf	7	Cover	21	Screw
2.2	Top door hinge leaf	8	Insulation mat	F1/6	Instrument panel fuse box

 Danger !	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
 	Remove/install
1	Remove right front door		AR72.10-P-0500LF
2	Remove door sill molding (3)
3	Remove edge guard (4) in area of side floor covering (5) from body flange
4	Fold footrest floor covering (6) toward rear
5	Remove cover (7)
6	Detach side floor covering (5) from A-pillar and fold over
7	Unclip instrument panel fuse box (F1/6) from A-pillar and lay down to side with electrical lines connected
8	Press insulating mat (8) to side until cap (9) is accessible
9	Remove cap (9)	Before installing cap (9):
		
		Install front door and adjust
			AR72.10-P-0500LF
10	Unscrew nuts (10) and remove bottom A-pillar hinge leaf (1.1)	 Nut, hinge to A-pillar	*BA72.10-P-1002-01X
11	Unscrew bolts (11) and remove bottom door hinge leaf (1.2)	 Bolt, hinge to doors	*BA72.10-P-1001-01X
12	Remove dashboard		AR68.10-P-1000LC
13	Mark installation position of upper A-pillar door hinge leaf (2.1) and upper door hinge leaf (2.2)
14	Remove cover (7)	Before installing cover ()
		
		Install front door and adjust
			AR72.10-P-0500LF
15	Unscrew nuts and remove upper A-pillar hinge leaf (2.1)	 Helper required to hold upper A-pillar hinge leaf (2.1).
		 Nut, hinge to A-pillar	*BA72.10-P-1002-01X
16	Unscrew bolts (21) and remove top door hinge leaf (2.2)	 Bolt, hinge to doors	*BA72.10-P-1001-01X
17	Install in the reverse order

 Front door

Number	Designation		MODEL 217
BA72.10-P-1001-01X	Bolt, hinge to doors	Nm	35

 Front door

Number	Designation		MODEL 217
BA72.10-P-1002-01X	Nut, hinge to A-pillar	Nm	35

Powiązane dokumenty

ar6810p1000lc
ar7210p0500lf Demontaż i montaż drzwi przednich
ar7210p0500lfs Demontaż i montaż drzwi przednich
as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.