Adjust front door crank window

AR72.10-P-1950MCC

Adjust front door crank window

30.11.06



Check

1

Close door, slightly press back seal (2) in area of crank window (1) and measure gap between A-pillar and crank window (1) as well as roof frame and crank window (1).

 The distance between the crank window (1) and the A-pillar and the roof frame should run parallel over the entire length.



*452589012100

2

Measure recess depth of crank window (1) in seal (2).



*452589012100



Removing

3

Remove door paneling

AR72.18-P-1000MCC

Adjust height and longitudinal direction

4

Open door and lower crank window (1) approx. 10 cm.

5

Loosen bolts (3)

6

Adjust crank window (1) in vertical and longitudinal direction according to gap dimensions measured previously.

7

Tighten screws (3)



*BA72.10-P-1007-01H

8

Close crank window (1) and door, slightly press back seal (2) in area of crank window (1) and measure gap between A-pillar and crank window (1) as well as roof frame and crank window (1).

 The distance between the crank window (1) and the A-pillar and the roof frame should run parallel over the entire length.

If necessary, repeat adjustment



*452589012100

Adjust recess depth

9

Loosen bolts (4)

10

Adjust recess depth of crank window (1) in seal (2) by moving crank window (5)

11

Tighten bolts (4)

12

Measure recess depth of crank window (1) in seal (2).



*452589012100



Install

13

Install door paneling.

AR72.18-P-1000MCC

Number

Designation

Model 451.3/4

BA72.10-P-1007-01H

Screw, side window to power window

Nm

10