Adjusting crank window in front door

AR72.10-P-1950GA

Adjusting crank window in front door

12.3.10

Adjusting

1

Check front door adjustment, adjust if necessary

AR72.10-P-0550G

2

Remove door liner on front door

AR72.10-P-1000G

3

Remove loudspeakers (H4/1, H4/2)

4

Pull door foil off of inner door panel

5

Loosen screws (2, 3)

6

Close crank window until front edge (arrows) is flush with front door (mirror triangle), then tighten screw (2)

 For this purpose, move crank window (1) into slider jaw of screw (2) .

7

Adjust crank window so that upper edge of glass touches the inner lip of the rubber seal (arrows) over the entire length when the door lock is in the first catch position, then tighten screws (2, 3) and nuts (4).

In the second door lock catch position, the edge of the glass of the crank window should disappear completely below the rubber seal.
If required, the inclination can be corrected by loosening both nuts (4) and the longitudinal position of the crank window can be corrected by loosening screws (2, 3).

8

Tighten screws (2, 3) and nut (4) if loosened

 Check adjustment of crank window, if necessary: 

Repeat adjustment.

9

Install stoppers on door bottom plate (5)

10

Clean crank window

*BR00.45-Z-1007-04A

11

Reattach door foil on inner door panel

 Replace damaged door foil.

12

Install loudspeakers (H4/1, H4/2)

13

Install door liner on front door

AR72.10-P-1000G

Number

Designation

Order number

BR00.45-Z-1007-04A

Cleaner, plastic windows, fabric top 500 ml

A 001 986 38 71