P72.10-3891-06
1 Door lining
2 Crank window
3 Cover
4 Airbag badge
5 Trim strip
6 Screw
7 Mounting clip
8 Front door
9 Locking knob
10 Electrical connectors
11 Electrical connector
12 Inside door opener Bowden cable
13 Inner door handle
N69/1 Left door control unit
N69/2 Right door control unit
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Completely open crank window (2). | ||
2 | Unclip cover (3) with extraction hook | Pulling hook | |
3 | Unclip airbag badge (4) | Mounting wedge | |
4 | Unclip trim strip (5) | Mounting wedge | |
5 | Remove bolts (6) | TORX screwdriver T25 gotis://G_58.3_06.2 | |
6 | Unclip door lining (1) from mounting clips (7) on front door (8) | Move assembly wedge directly to mounting clips (7) and ensure that the retaining tabs on the mounting clips (7) do not tear out of the door lining (1). | |
Mounting wedge | |||
7 | Horizontally loosen door lining (1) to side from front door (8). Guide lock button (9) out of door lining (1). | Detach door liner (1) from front door (8) until electrical connectors (10) on left door control unit (N69/1) or right door control unit (N69/2), electrical connector (11) or inside door opener Bowden cable (12) are accessible. | |
Installation: Ensure that door lining (1) is seated correctly in inner sealing frame. | |||
8 | Disconnect electrical connectors (10) from left door control unit (N69/1) or right door control unit (N69/2) | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
9 | Disconnect electrical connector (11) | ||
10 | Unhook inside door opener Bowden cable (12) from inner door handle (13). | ||
11 | Remove door lining (1) | ||
12 | Install in the reverse order |
140 589 02 33 00
Pulling hook
Mounting wedge
110 589 03 59 00
Powiązane dokumenty
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.