Removing and installing door liner on front door

AR72.10-P-1000A

Removing and installing door liner on front door

16.3.10

 

Removing, installing

1

Open crank window

2

Unclip mirror triangle cover (2) from above using assembly wedge, pull upwards and remove



*110589035900

3

Unclip entrance lamp, disconnect electrical connection and remove entrance lamp

4

Unclip SRS cover (3) and unscrew screw (4)

With code 292 (front side airbag)

5

Open door pocket cover

6

Unclip and remove cover (5) in door pocket

7

Unscrew screws (6) in the area of the front and rear door pocket

8

Detach chrome surround (7)

9

Remove lock escutcheon (8)

10

Press door lining (1) off door inner panel at bottom, front and rear using assembly wedge



 Guide each assembly wedge straight to the clips.

*110589035900

11

Lift door lining (1) out of retaining clips at the top of the sealing rail using assembly wedge and at the same time pull away from the inner door panel


 Installation: Press on door lining in area of interior door control so that the lug (arrow) engages in the inner door panel (arrow).

Guide entrance lamp electrical connection through the recess in the door lining

*110589035900

12

Unhook control cable (9) on interior door control

13

Disconnect seat adjuster electrical connectors (10) on door lining

14

Remove door lining (1) and put down on clean base

15

Check films and clips on inner door panel and replace if necessary.

 Stick door film onto inner door panel.

*BR00.45-Z-1004-02A

16

Check clips on door lining (1) and replace if necessary.

17

Install in reverse order

Number

Designation

Order number

BR00.45-Z-1004-02A

Adhesive PVC 914

A 001 989 30 71