Remove/install sealing frame of front door

AR72.10-P-0011MFA

Remove/install sealing frame of front door

28.09.2018

Model

177, 247

1

Frame seal

2

Front door

3

Spacer strips

4

Insert

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A



Remove

1

Remove sealing frame (1) from front door (2) on left and/or right.

2

Remove adhesive residue from front door (2) using a surface conditioning disk and clean bonding surface.

Topical note

Notes on removing adhesive residues and foils on paint and metal surfaces with surface conditioning disks

AH00.00-P-0013-01AK

 Bonding surface must be free of grease and dust.

 Surface conditioning disk Ø 100  mm with attachment shaft, 3M Deutschland GmbH D-41453 Neuss.

Cleaner

*BR00.45-Z-1025-04A



Install

3

Remove spacer strip (3) by approx. 2 cm at one end of new sealing frame (1).

4

Glue sealing frame (1) onto front door (2) starting at center of lower door edge.

 Spacer strip (3) of sealing frame (1) must be in contact with door paneling over its entire length, without gap.

5

Cut off sealing frame protrusion (1) at bottom edge of door and connect the two ends of the door frame seal (1).

 Cut off protrusion so that there is no gap between the two ends of sealing frame (1). Do not cut off protrusion at end of sealing frame (1) at which insert (4) protrudes.

6

Firmly roll on sealing frame (1) using a roller.

 Roller

*168589056300

7

Completely remove spacer strip (3) from sealing frame (1) starting at detached end.

Repair materials

Number

Designation

Order number

BR00.45-Z-1025-04A

Cleaner

A 005 989 19 71