Remove/install front door window

AR72.10-D-1910NA

25.11.09

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

D72.10-1106-12

1 Window(s)

2 Frame seal

3 Screw

 	Remove/install
1	Remove screws (3) and remove crash reinforcement		*BA72.15-N-1017-01A
2.1	Remove crank mechanism	 Except code V50, two power windows.	AR72.15-D-5605B
		 Do not remove crank mechanism from carrier panel.
2.2	Remove power window motor	With code V50, two power windows.	AR72.29-D-1860NA
		 Do not remove motor from carrier panel.
3	Carefully lower window (1) down into door, move out of frame seal (2) on left and right (arrows) and remove
4	Install in the reverse order

 Hinged doors

Number	Designation		Model WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7


BA72.15-N-1017-01A	Bolt, crash reinforcement to hinged door	Nm	21