ar7200d4691f

Remove/install lock cylinder

Typ ar · temat 72.00 · wersja 0101 · 2016-11-28

Dotyczy: Model 909

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.00 Informacje ogólne — Seria 909

EinPAS 29 System uprawniający do jazdy/zabezpieczający › 29.16 Blokowanie/ odblokowanie › 29.16.32 Zamek/ klamka — Seria 909

AR72.00-D-4691F

Remove/install lock cylinder

18.11.2016

Model

909

Remove/install lock cylinder

Shown on door handle of right front door

1

Door handle

D72.00-0007-11

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove

1

Remove corresponding door handle (1)

Front door handle

AR72.10-D-2400FA

Rear door handle

AR72.20-D-2420F

Sliding door handle

AR72.16-D-2220FA

2

Insert transponder key into lock cylinder and turn to right against stop

3

Press retaining vane on lock cylinder downward through slot (arrow) in door handle (1)

4

Pull out lock cylinder

Install

5

Insert transponder key with lock cylinder up to end stop into mounting hole of door handle (1)

Lock cylinder fits only in one position and arrests only in this position.

6

Install corresponding door handle (1)

Rear door handle

AR72.20-D-2420F

Sliding door handle

AR72.16-D-2220FA

Front door handle

AR72.10-D-2400FA

Powiązane dokumenty