ar6880p0010frx

Remove/install load compartment floor front section

Typ ar · temat 68.80 · wersja 0100 · 2019-02-22

Dotyczy: Model 290

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 68 Wyposażenie wewnętrzne › 68.80 podłoga przestrzeni bagażowej/wykładziny podłogowe — Seria 290

EinPAS 37 Wyposażenie wnętrza › 37.46 Podłoga › 37.46.33 Podłoga przestrzeni ładunkowej — Seria 290

AR68.80-P-0010FRX

Remove/install load compartment floor front section

14.12.2018

Model

290

Remove/install load compartment floor front section

1

Load compartment floor rear section

2

Load compartment floor front section

3

Tie-down eyes

4

Guides

P68.80-2136-04

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

Remove/install

1.1

Fold back seat backrests in the rear passenger compartment.

Model 290
with code 287 (Folding seat backrests in rear passenger compartment)

1.2

Remove partition in rear.

Model 290
except code 287 (Folding seat backrests in rear passenger compartment)

AR68.74-P-0651FRX

2

Remove load compartment floor rear section (1).

3

Unclip covers over tie-down eyes (3).

4

Remove tie-down eyes (3).

Bolt, cargo retainers/tie-down eye to body

*BA68.50-P-1001-03J

5

Lift load compartment floor front section (2) at front and remove toward rear.

Installation: Ensure that guides (4) are correctly seated.

6

Install in the reverse order

Cargo retainers

Number

Designation

Model 290

BA68.50-P-1001-03J

Bolt, cargo retainers/tie-down eye to body

Nm

30

Powiązane dokumenty