ar6850s7816e

Remove/install curtain for side window in rear

Typ ar · temat 68.50 · wersja 0100 · 2015-07-01

Dotyczy: Model 447.7 with code ZH6 (Marco Polo ACTIVITY)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 68 Wyposażenie wewnętrzne › 68.50 Zasłonki, rolety, siatki na bagaż, mocowania ładunku — Seria 447 (modele 7**)

EinPAS 37 Wyposażenie wnętrza › 37.57 Ochrona przed światłem/ osłona wzrokowa › 37.57.31 Roleta/zasłonka — Seria 447 (modele 7**)

AR68.50-S-7816E

Remove/install curtain for side window in rear

18.6.15

Model

447.7

with code ZH6 (Marco Polo ACTIVITY)

Remove/install curtain for side window in rear

S68.50-4526-09

Shown on right side window in rear

1

Curtains

4

Cover

7

Spacer

2

Coat hook

5

Curtain rod

3

Pushbuttons

6

Screw

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Completely move passenger bench seat toward rear

2

Remove coat hook (2) from B-pillar

Model 447.7
with code ZH6 (Marco Polo ACTIVITY)
except code T19 (Sliding door left)
When removing curtains (1) from left front window.

3

Detach curtains (1) at push buttons (3) from window frame paneling

Model 447.7
with code T19 (Sliding door left)
with code ZH6 (Marco Polo ACTIVITY)
When removing curtains (1) from side window in left and right sliding door.

4

Detach curtains (1) from pushbuttons (3) on B-pillar paneling and C-pillar paneling

Model 447.7
with code ZH6 (Marco Polo ACTIVITY)
except code T19 (Sliding door left)
When removing curtains (1) from left front window.

5

Remove coat hooks (2) from C-pillar

When removing curtains (1) on left and right rear side window.

6

Detach curtains (1) at pushbuttons (3) on C-pillar paneling and D-pillar paneling

When removing curtains (1) on left and right rear side window.

7

Unclip cover (4) by hand

8

Mark installation position of curtain rod (5)

Not when replacing curtain rod (5).

The curtain rod (5) may be bent upward slightly on some vehicles.

9

Remove bolt (6)

Installation: Observe marking of installation position on curtain rod (5) before screwing in bolt (6). Install curtain rod (5) with bending pointing upward.
If the curtain rod (5) is installed in the new paneling without a hole for the bolt (6), center curtain rod (5) before screwing bolt (6).

10

Remove spacers (7)

11

Slide curtain rod (5) to left or right into corresponding paneling until the other end of the curtain rod (5) is moved out the paneling

12

Pull curtain rod (5) out of corresponding paneling together with curtains (1)

13

Remove curtains (1) from curtain rod (5)

Only when replacing curtains (1) or curtain rod (5).

14

Install in the reverse order

Powiązane dokumenty