ar6850s6020e

Remove/install curtain on rear window

Typ ar · temat 68.50 · wersja 0100 · 2015-06-29

Dotyczy: Model 447.7 with code ZH6 (Marco Polo ACTIVITY)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 68 Wyposażenie wewnętrzne › 68.50 Zasłonki, rolety, siatki na bagaż, mocowania ładunku — Seria 447 (modele 7**)

EinPAS 37 Wyposażenie wnętrza › 37.57 Ochrona przed światłem/ osłona wzrokowa › 37.57.31 Roleta/zasłonka — Seria 447 (modele 7**)

AR68.50-S-6020E

Remove/install curtain on rear window

18.6.15

Model

447.7

with code ZH6 (Marco Polo ACTIVITY)

Remove/install curtain on rear window

S68.50-4525-09

1

Curtain

4

Pushbuttons

7

Screw

2

Pushbuttons

5

Cover

8

Spacer

3

Window frame paneling

6

Curtain rod

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Open liftgate

2

Loosen left curtain (1) on pushbuttons (2) from window frame lining (3)

3

Loosen right curtain (1) on pushbuttons (4) from window frame paneling (3)

4

Unclip cover (5) by hand

5

Mark installation position of curtain rod (6)

Not when replacing curtain rod (6).

The curtain rod (6) may be bent up slightly on some vehicles.

6

Unscrew screw/bolt (7)

Installation: Observe marking of installation position on curtain rod (6) before screwing in bolt (7). Install curtain rod (6) with bending pointing upward.
If the curtain rod (6) is installed in a new window frame panel (3) without bolt hole (7), ensure that curtain rod (6) is centered before screwing in bolt (7).

7

Remove spacers (8)

8

Push curtain rod (6) to left or right into window frame lining (3) until the other end of the curtain rod (6) is guided out of the window frame lining

9

Pull curtain rod (6) out of window frame lining (3) and remove together with curtains (1)

10

Remove both curtains (1) from curtain rod (6)

Only when replacing curtains (1) or curtain rod (6).

11

Install in the reverse order

Powiązane dokumenty