ar6830p8150rk

Remove/install trunk lid paneling

Typ ar · temat 68.30 · wersja 0101 · 2012-07-05

Dotyczy: MODEL 231

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 68 Wyposażenie wewnętrzne › 68.30 Wykładziny, rama ozdobna — Seria 231

EinPAS 37 Wyposażenie wnętrza › 37.45 Okładzina › 37.45.34 Okładzina bagażnika — Seria 231

AR68.30-P-8150RK

Remove/install trunk lid paneling

11.6.12

MODEL

231

Remove/install trunk lid paneling

P68.30-3615-09

1

Clips

5

Bracket

2

Cover

6

Clips

3

Retaining clips

7

Cover

4

Electrical connectors

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on sensor system for trunk lid opening/closing

AH80.61-P-0001-01A

Remove/install

Danger !

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of the mechanism when the components are moving.

AS00.00-Z-0009-01A

1

Open Vario roof fully

2

Remove plug-in clips (1)

Installation: Replace damaged plug-in clips (1).

3

Unclip retaining clips (3) from cover (2) at bottom of trunk lid

Remove cover (2) until electrical connectors (4) are accessible.

4

Disconnect electrical connectors (4)

5

Remove hazard warning triangle from bracket (5)

6

Unclip bracket (5) and remove in direction of arrow

7

Unclip plug-in clips (6) and remove paneling (7)

Installation: Replace damaged plug-in clips (6).

8

Install in the reverse order

Powiązane dokumenty