P68.30-2616-09
1 | Roof crossbeam trim | 4 | groove | 6 | Roof crossbeam | ||
2 | Vanity mirror | 5 | Electrical connector | 7 | Retaining hook | ||
3 | Watch case |
| Remove/install | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
1 | Remove the vanity mirror (2) on the left and right in the rear | ||
2 | Unclip the rear watch case (3) and pull it out of the roof crossbeam paneling (1) to the rear | Installation: The retaining hook (7) must reach into the roof crossbeam paneling (1). | |
3 | Disconnect the electrical connector (5) from the roof crossbeam (6) | ||
4 | Remove nut (4) | ||
5 | Carefully unclip the roof crossbeam paneling (1) from the roof bow (6) with assembly wedge (arrows) and remove it | Mounting wedge | |
6 | Install in the reverse order |
110 589 03 59 00
Mounting wedge
Powiązane dokumenty
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar6840p0002h