AR68.30-P-4800RBS | Remove/install side paneling in trunk | 30.10.08 |
MODEL 230.4 with CODE (P99) Special model "AMG Black Series"
P68.30-3403-08
1 Front paneling
2 Rear paneling
3 Luggage compartment division
7 Expansion clip
4 Floor Covering
5 Trunk lid seal
6 Bolts
P68.30-3404-06
2 Rear paneling
5 Trunk lid seal
6 Screw
8 Screw
9 Y fastener
| Remove/install | ||
1 | Open trunk lid | ||
2 | Unhook trunk partition (3) | ||
3 | Take floor covering (4) out of luggage compartment | ||
4 | Remove trim from rear end center assembly | Only when removing rear paneling (2) on side in trunk. | |
5 | Unscrew bolt (8) and remove Y-fastener (9) | Only when removing rear paneling (2) on side in trunk. | |
6 | Remove bolts (6) | ||
7 | Remove expansion clip (7) | Only when removing front paneling (1) on side in trunk. | |
Installation: Replace damaged expansion clips (7). | |||
8 | Loosen front paneling (1) from trunk lid seal (5) and remove | ||
9 | Loosen rear paneling (2) from trunk lid seal (5) and remove | ||
10 | Install in the reverse order |