Remove/install side paneling in rear

AR68.30-P-4780MFV

Remove/install side paneling in rear

17.12.2019

Model

118.3/6, 177.1/9, 247.0/7

Modification notes

09.12.2019

Remove corresponding seats in the rear passenger compartment.

Operation step 2.2.

Shown on model 177.1

1

Retaining clips

3

Retaining clips

5

Nuts

2

Side paneling

4

Tie-down eye

6

Fastening console

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

 

Remove/install

1

Remove C-pillar trim.

Model 118.6

AR68.30-P-4498MFD

Model 118.3, 177.1/9

AR68.30-P-4490MFV

Model 247.0/7

AR68.30-P-4490MFB

2.1

Remove seat backrest in rear.

Model 118.3/6, 177.1/9
Model 247.0/7
except code 567 (Vario rear seat)

Model 118.3, 177.1/9
except code 287 (Folding seat backrests in rear passenger compartment)

AR91.12-P-1713MFV

Model 118.3/6, 177.1
with code 287 (Folding seat backrests in rear passenger compartment)
Model 247.0/7
except code 567 (Vario rear seat)

AR91.12-P-1713MFA

2.2

Remove corresponding seats in the rear passenger compartment.

Model 247.0/7
with code 567 (Vario rear seat)

AR91.12-P-4026MFX

3

Remove tie-down eye (4).

 Screw/bolt for tie-down eye

*BA68.50-P-1001-03I

4

Remove load compartment floor from trunk.

5.1

Remove nuts (5) and remove mounting support (6).

Model 118.3/6, 177.1/9

5.2

Remove the fastening bracket (6) for the load compartment floor.

Model 247.0/7

6

Release trim at side in trunk until retaining clips (1) can be accessed.

Model 247.0/7

AR68.30-P-4800MFB

Model 118.3, 177.1/9

AR68.30-P-4800MFV

7

Carefully loosen the side paneling (2) on the retaining clips (1) and retaining clamps (3) and remove.

 Installation: Replace damaged retaining clips (1) and retaining clamps (3).
Ensure that the edge guard is seated correctly in the working area.

 Dismantling tool

*000589956300

8

Install in the reverse order.

 Cargo retainers

Number

Designation

Model 118

Model 177, 247

BA68.50-P-1001-03I

Screw/bolt for tie-down eye

Nm

24

24