ar6830p4600rk

Remove paneling in trunk

Typ ar · temat 68.30 · wersja 0100 · 2013-03-11

Dotyczy: MODEL 231

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 68 Wyposażenie wewnętrzne › 68.30 Wykładziny, rama ozdobna — Seria 231

EinPAS 37 Wyposażenie wnętrza › 37.45 Okładzina › 37.45.34 Okładzina bagażnika — Seria 231

AR68.30-P-4600RK

Remove paneling in trunk

25.02.2013

MODEL

231

Remove paneling in trunk

P68.30-3685-09

Shown on removed trunk floor paneling (5)

1

Center luggage compartment paneling

3

Cover

5

Trunk floor paneling

2

Radio holder

4

Retaining clip

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on sensor system for trunk lid opening/closing

AH80.61-P-0001-01A

Remove/install

1

Remove left and right paneling in trunk

AR68.30-P-4800RK

2

Remove retaining clips (4)

3

Pull cover (3) with pin out of radio holder (2)

For this purpose unclip cover (3) from radio holder (2) at both sides (arrows) with suitable screwdriver.

4

Remove radio holder (2)

5

Remove center trunk paneling (1)

6

Install in the reverse order

Powiązane dokumenty