P68.30-2802-04
Shown on vehicle with IR remote control
1 Front roof frame paneling
2 Bolt
3 Sun visor
4 Spreading clip
5 Connector
6 Connector
7 IR receiver
E15/2 Interior lamp
| Remove/Install | ||
1 | Remove side struts | See Operating Instructions | |
2 | Remove paneling from A-pillar | ||
3 | Unscrew bolt (2) from sun visor (3) on left and right and remove sun visor (3) | ||
4 | Remove left and right spreading clips (4) | ||
5 | Unclip front roof frame paneling (1) from roof frame. | Do not damage roof tip seal Installation: Replace damaged clips. | |
Assembly wedge | |||
6 | Disconnect connector (5) from interior lamp (E15/2) | ||
7.1 | Disconnect connector (6) from IR receiver (7) | On vehicles with code (V25) infrared remote control (FFO). | |
8 | Remove front roof frame paneling (1) | ||
9 | Install in the reverse order |
Assembly wedge
110 589 03 59 00