Remove/install handle on roof

AR68.30-P-4330HA

Remove/install handle on roof

08.03.2019

Model

240.1

Rear grab of handle

1

Grab handle

2

Covers

3

Screw

4

Retaining clamp

B25/1

Microphone (for code (216) full-duplex intercom system or for code (378) telephone in rear passenger compartment Motorola Phoenix ECE cell phone or for code (373) telephone pre-installation cell phone in the rear passenger compartment Motorola CDMA/TDMA)

B25/2

Portable CTEL microphone

 

Remove/install

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Notes on replacing trim strips in vehicle interior

AH68.00-P-0002-01H

1

Fold up covers (2) with suitable tool

2

Remove bolts (3)

3

Unclip grab handle (1) with an assembly wedge from the retaining clips (4)

 Installation: Replace defective retaining clips (4).

 Mounting wedge

*110589035900

4.1

Unclip cell phone microphone (B25/2) from the grab handle (1)

Cell phone microphone (B25/2)

 Installation: Ensure that the wiring harness of the cell phone microphone (B25/2) is routed correctly.

4.2

Unclip microphone (B25/1) from the grab handle (1)

Model 240.1 with code 216 (full-duplex intercom system) with code 373 (telephone pre-installation cell phone in the rear passenger compartment Motorola CDMA/TDMA) with code 378 (telephone in the rear passenger compartment, cell phone Motorola Phoenix ECE)

 Installation: Ensure that the wiring harness of the microphone (B25/1) is routed correctly.

5

Install in the reverse order