Shown on front grab handle (1) |
1 | Grab handle |
2 | Covers |
3 | Clips |
P68.30-3598-06
Shown on front grab handle (1) |
1 | Grab handle |
2 | Cover |
3 | Clip |
P68.30-4022-11
| Remove | ||
1 | Remove covers (2) | ||
2 | Press clips (3) together and remove grab handle (1) | ||
3 | Release and disconnect electrical connector of rear illumination at grab handle (1) | Only at rear grab handle (1). | |
4 | Remove clips (3) from body | ||
| Install | ||
5 | Clip clips (3) and covers (2) into grab handle (1) | Ensure that clips (3) fully engage in grab handle (1) (arrows). | |
6 | Connect electrical connector of rear illumination at grab handle (1) | Only at rear grab handle (1). | |
7 | Clip grab handle (1) into roof | ||
| Check | ||
8 | Check that grab handle (1) is correctly seated on roof |