P68.30-3263-06
Shown on model 230.4 without code (P99) Special model "AMG Black Series"
1 Trim
2 Electrical connector
3 Clip-type fastener
4 Guides
5 Wiring harness
6 Long wedge
B32/1 Automatic light switch daylight sensor
(vehicles up to 14.1.04)
B38 Rain sensor
(vehicles up to 14.1.04)
B38/2 Rain/light sensor
(vehicles as of 15.1.04)
E14/6 Left vanity mirror illumination
E14/7 Right vanity mirror illumination
| Remove/install | ||
1 | Open Vario roof completely | On vehicles without code (P99) Special model "AMG Black Series" | |
2 | Remove left and right paneling from A-pillar | ||
3 | Remove overhead control panel control unit | ||
4 | Remove inside rearview mirror | ||
5 | Disconnect electrical connector on rain sensor (B38) or rain/light sensor (B38/2) | ||
6 | Disconnect electrical connector on automatic light switch daylight sensor (B32/1) | Up to 14.1.04 | |
7 | Remove left and right sun visor | ||
8 | Unclip left vanity mirror illumination (E14/6) and right vanity mirror illumination (E14/7) | ||
9 | Disconnect electrical connectors (2) from left vanity mirror illumination (E14/6) and right vanity mirror illumination (E14/7) and remove left vanity mirror illumination (E14/6) as well as right vanity mirror illumination (E14/7) | ||
10 | Remove paneling (1) toward rear from windshield frame. | Installation: Slide clip-type fasteners (3) and guides (4) into windshield frame | |
On vehicles without code (P99) Special model "AMG Black Series" lift rubber lip (arrow) with long wedge (6) over paneling (1). | |||
| |||
11 | Detach wiring harness (5) | Observe installation position of wiring harness (5). | |
12 | Install in the reverse sequence |
Long wedge
115 589 03 59 00