Remove/install upper side load compartment trim

AR68.30-P-1186FRX

Remove/install upper side load compartment trim

11.07.2018

Model

290

Shown on left side of vehicle

1

Upper load compartment trim

2

Cargo area paneling

3

Seat belt

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

 

Remove/install

1

Remove rear passenger compartment side trim.

AR68.30-P-4780FR

2

Remove rear seat belt end fitting.

 Bolt, rear belt end fitting

*BA91.40-P-1005-01U

3

Fold forward rear seat backrests.

4

Detach and remove rear shelf.

5

Unclip upper load compartment trim (1) at load compartment trim (2) and in area of D-pillar trim.

 Installation: Ensure that sealing frame is seated correctly on liftgate.

 Long wedge

*115589035900

6

Guide seat belt (3) through upper load compartment trim (1) and remove upper load compartment trim (1).

7

Install in the reverse order

 Seat belts/emergency tensioning retractors

Number

Designation

Model 290

BA91.40-P-1005-01U

Bolt, rear belt end fitting

Nm

35