P68.20-3649-09
1 Lower release button
2 Armrest
3 Cover
4 Instrument panel
5 Bolts
10 Bolts
A40/9 Front central operating unit
6 Cover on center console
8 Electrical connector
9 Wiring harness
| Remove/install | ||
1 | Switch off ignition and withdraw transmitter key or Keyless Go start/stop button from the EIS [EZS] control unit | Keyless Go start/stop button only for vehicles with code (889) Keyless Go. | |
2 | Remove turn/push control | ||
3 | Press lower release button (1) and fold armrest (2) upright toward rear | ||
4 | Unclip cover (3) from instrument panel (4) | | |
5 | Remove bolts (5) | ||
6 | Manually unclip cover on center console (6) upward in front area. | ||
7 | Disconnect electrical connector (8) and unclip plug on electrical connector (8) from instrument panel (4). | ||
8 | Guide electric wiring harness (9) out of instrument panel (4) and remove cover on center console (6) with central front control unit (A40/9). | Installation: Ensure that electric wiring harness (9) is routed correctly | |
| Notes on avoiding damage to electronic components due to electrostatic discharge | ||
9.1 | Unscrew bolts (10) and remove central front control unit (A40/9) from cover on center console (6). | Only when replacing cover on center console (6). | |
| Notes on avoiding damage to electronic components due to electrostatic discharge | ||
10 | Install in the reverse order |
Wedge tool
110 589 03 59 00
Powiązane dokumenty
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar5421p0501sx Demontaż i montaż pokrętła wciskowego głównego panela obsługi z przodu