P68.20-2973-09
1 Stowage compartment
2 Accessory parts
3 Vertical strut
4 Bolts
9 Connector
10 Connector
5 Center console
6 Plug
7 Screw
8 Electrical connector
| Remove/Install | ||
1.1 | Remove radio | On vehicles with code (C01, C02, C12, C16, C21, C25 or C26) | |
2 | Pull stowage compartment (1) out to stop and remove. | Press arrests (arrows) to inside and pull stowage compartment (1) over arresting points. | |
3 | Remove pushbuttons from actuating lever on heater control unit. | Carefully remove pushbutton to prevent damage to the actuating levers of the heater control unit. Installation: Observe installation position of pushbuttons in relation to actuating levers. | |
4 | Remove end caps (arrows), unscrew screws underneath and remove accessory parts (2) from vertical strut (3) | ||
5 | Unscrew screws (4) from center console (5) | ||
6 | Remove plug (6) and unscrew bolts below | ||
7 | Unscrew screws (7) on center console (5) | ||
8 | Lift center console (5) until electrical connector (8) is accessible | ||
9 | Disconnect electrical connector (8) and remove connector (9, 10) | ||
10 | Remove center console (5) | When replacing center console (5): | |
Transfer 12 volt socket | |||
Transfer blower switch | |||
Transfer warning flasher switch | |||
11 | Install in the reverse order |