1 | Cover |
2 | Screw |
3 | Dashboard top section |
4 | Speaker cover (left) |
5 | Speaker cover (right) |
6 | Screw |
7 | Bracket |
8 | Screw |
D68.10-1103-12
| Remove/install | ||
1 | Remove cover from radio installation shaft | ||
2 | Remove covering on instrument cluster | ||
3 | Remove stowage compartment above glove compartment | ||
4 | Remove left and right A-pillar paneling | Unclip left and right A-pillar paneling and pull out upward. | |
5 | Remove speaker covers (4, 5) | Unclip speaker covers (4, 5) at outside and remove in direction of A-pillar. | |
6 | Remove screw/bolt (6) and remove bracket (7) | ||
7 | Unscrew screws/bolts (2, 8) | To facilitate removal of bolts (8), unclip cover for switches on upper heater/ventilation in center and lift slightly. | |
8 | Pull instrument panel top section (3) toward rear and remove | Installation: Install instrument panel top section (3) and push toward front. | |
9 | Unclip cover (1) | When replacing dashboard top section (3). | |
10 | Install in the reverse order |