AR68.10-D-1010NA | Remove/install instrument panel support with instrument panel | 7.2.01 |
MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
MODEL 903.61 /66 /67, 904.61 /66 with code (ZU7) National version for Canada
MODEL 903.61 /66 /67, 904.61 /66 with code (ZU8) National version for USA
MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with code (ZU9) National version for Mexico
D68.10-1119-11
1 Instrument panel support
| Remove/install | ||
1 | Disconnect ground line from battery | ||
2 | Remove radio | ||
3 | Remove ventilation box | ||
4 | Remove electrical center | ||
5 | Remove electronic selector lever module (ESM) | ||
6 | Remove covering at instrument cluster | ||
7 | Remove instrument cluster | ||
8 | Remove paneling from left A-pillar | Unclip upper paneling and pull out upward. | |
9 | Unscrew sun visors | ||
10 | Remove inside rearview mirror | Push inside rearview mirror up and remove. | |
11 | Expose antenna line | ||
12 | Remove beverage holder | ||
13 | Remove instrument panel support (1) | ||
Installation: Install instrument panel support. | |||
| |||
14 | Install in the reverse order | ||
15 | Set time on instrument cluster | ||
16.1 | Set time on timer for auxiliary heater | With code H12 Warm water auxiliary heater or H86 Timer for auxiliary heater. | |
17 | Code radio | ||
18 | Read out fault memory | If necessary, delete DTC memory. |
Steering wheel, jacket tube, steering shaft
Powiązane dokumenty
- ar2760d0901a Demontaż i montaż elektronicznego modułu dźwigni wybierania biegów (EWM)
- ar5425d1382a Demontaż i montaż głównego układu elektrycznego
- ar5430d6015c Demontaż i montaż zestawu wskaźników
- ar6810d101001na
- ar6810d101002na
- ar6810d1550a Demontaż i montaż osłony zestawu wskaźników
- ar6810d1700na
- ar8260d7502a Demontaż i montaż radia
- ar8262d101001a Odsłanianie przewodu antenowego
- ar8310d0010na