1 Actuator mounting screws
2 Mounting screw on vent window
3 Bracket
4 Motor bracket mounting screws
5 Connector
6 Cable strap
S67.39-2500-03
| Removal, installation | ||
1 | Remove paneling on D-pillar | ||
2 | Disconnect electrical connector (5) | Separate cable strap (6) | |
3 | Unscrew mount (2) on vent window | Secure vent window against unintentionally opening with adhesive tape | |
4 | Unscrew actuator mounting screws (1) from D-pillar | ||
5 | Unscrew bracket (3) for drive shaft from | ||
6 | Unscrew mounting screws (4) for motor bracket on D-pillar | ||
7 | Reinstall in opposite order |