P67.30-2148-09
Shown on model 171
1 Nut
2 Screw
3 Nut
7 Nut
8 Rear fender liner
4 Screw
5 Rear side window
6 Bolts
P67.39-2080-01
9 Power window
M10/5 Left rear power window motor
M10/6 Right rear power window motor
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer. | |
Danger! | Risk of injury caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities | No parts of the body or limbs should be within the operating range of the mechanism when moving components. | |
1 | Remove left and right rear side window | Model 171 | |
Model 172 | |||
2 | Remove cover above nut (7) in left and right inner fender (8) | Installation: Install cover above nut (7) only after adjusting rear side window. | |
3 | Unscrew nut (7) | Installation: Align mounting bolt of power window (9) in center in elongated hole. | |
Model 171 | |||
4 | Loosen jam nut (1) on bolt (2) | Model 171 | |
5 | Loosen bolt (2) | Model 171 | |
6 | Remove power window (9) upward from center console | ||
7 | Disconnect electrical connector left rear power window motor (M10/5) or right rear power window motor (M10/6) | ||
8 | Remove electrical wiring harness from left rear power window motor (M10/5) or right rear power window motor (M10/6) | Installation: Install new cable ties. | |
9 | Install in the reverse order | ||
10 | Adjusting rear side windows | Model 171 | |
Model 172 |
Side window electrical system
Powiązane dokumenty
- ar6730p4000v
- ar6730p4000w
- ar6730p4200v
- ar6730p4200w
- as0000z000901a Niebezpieczeństwo zakleszczenia lub zmiażdżenia, w skrajnym przypadku obcięcia kończyn podczas prac przy układach mechanicznych.
- as0000z001001a Zagrożenie życia na skutek ześlizgnięcia lub spadnięcia pojazdu z podnośnika.