Test values for rear side window
Number | Designation | Model | ||
BE67.30-P-1003-01E | Gap between door window and rear side window, bottom | Dimension "c" | mm | 9 |
BE67.30-P-1004-01E | Gap between door window and top rear side window | Dimension "d" | mm | 8 |
Side windows
Feeler gauge
129 589 03 21 00
P67.30-2117-11
Soft top opened, rear window (1), door window (5) moved up and doors closed.
1 Remove coupling from left door contact switch (S17/3) and right door contact switch (S17/4)
2 Deactivate short stroke lowering; for this purpose remove left door contact switch (S17/3), right door contact switch (S17/4).
3 Remove rubber grommets on bolts (2, 3).
4 Slacken bolts (2, 3).
P72.10-2495-01
5 Slide rear side window (1) downward and toward rear.
P67.30-2116-01
P67.30-2141-11
6 Slide rear side window (1) upward and toward front until top edges (4) of rear side window and door window are flush.
7 Simultaneously adjust gap between door window (5) and rear side window (1) to dimension (c) at bottom and dimension (d) at top.
8 Tighten bolts (2, 3) .
9 Lower rear side window (1) and move up.
10 Check gap pattern, correct if necessary.
The wedge-shaped gap is intentional to compensate for soft top settling.
11 Tighten bolts (2, 3), install rubber grommets on bolts (2, 3)
12 Activate short stroke lowering; for this purpose install left door contact switch (S17/3), right door contact switch (S17/4).
13 Plug in connector for left door contact switch (S17/3), right door contact switch (S17/4).